This is a quality metal bobbin case that was made to the original specifications for the Singer 221 Featherweight sewing machine. The picture shows the outside and the inside of the bobbin case.
This is the metal bobbin that fits the Singer 221 Featherweight sewing machines. Sold separately or in a group of 10 or 20. First price ($4.95 is for 10).
This is the cap that covers the hole where the carbon brushes are removed. Often the screwdriver slot in the top becomes cracked and they need to be replaced. Price is for set of 2.
This carbon motor brush comes without the spring that is shown in the photo. The springs attached to the brushes replaced can be usually reused. There are two brushes, one on the top and one on the bottom of the Singer 221 motor. Price for set of 2.
This case is made with the same quality as the original cases with an accessory tray on the left side and space for your sewing machine to fit with your foot controller under the accessory tray on the left. New more sturdy handle!
These are the cushions that your featherweight rest on. They become hard and brittle over time and need to be replaced by removing the small screw that holds them to the bottom of your sewing machine. A set includes 4 cushions.
This book is a must have for anyone who owns or wants to own a Singer 221 Featherweight sewing machine. This new edition has lots of additional information that was not in previous editions.
This is a great foot for all kinds of stitching. I like it best for free motion quilting because I can see a larger area around the needle. It is low, straight shank so fits Singer 221 Featherweight and other low, straight shank machines.
This foot is a straight, short shank design for the Singer 221 Featherweight so that you can get that consistent 1/4 inch quilting seam allowance each and every time.
This is the pulley at goes on the end of the motor shaft that holds the hoop of the belt that runs the sewing machine. Compatible with Singer 221 motors.
This is the new style of needle plate that fits all Singer 221 Featherweight sewing machines. It aids sewing more accurately due to the groove lines to line up the edge of your fabric as you guide it into the machine.
This is the replacement receptacle for the 3 pins that accepts the plug on the foot controller. Compatible for all Singer 221 machines. The edge of the receptacle often gets hit and breaks out a piece of the outer edge.
New screws to attach the bed cushion to the bottom of the base of the Singer 221 Sewing Machine. When replacing the bed cushions, it is a good idea to replace the screws as well. Set of four (4).
This is the screw for the Singer 221 Bobbin case that adjusts the tension. As you are looking at the bobbin case with the opening for the bobbin on the right side, it is the first screw on the Bobbin Case Tension Spring.
This screw attaches the top lid on the Singer 221 and needs to be replaced for wear and tear because this is the access point for oil and to lubricate the top set of gears.
This is the screw at attaches the latch to the bobbin case. It goes in from the inside of the bobbin case and holds the latch attached to the bobbin case.
This is a 36 page booklet that provides information on cleaning, oiling, lubricating and adjusting your Singer 221 Featherweight. If you are missing your original manual, then this is what you need!
This is a clear acrylic table for Singer Featherweight sewing machine that is 18 inches by 24 inches. Machine in picture is not included, but used to show how well it fits.
This is an acrylic portable sewing table made to fit the Singer 221 Featherweight sewing machine. Shown here with a Featherweight that is not included so you can see how well it fits.
More due in a couple of days.
This is a Sew Steady Table made out of acrylic and with silk screened ruler on that is specifically made to fit the 221K white and mint green models with the shorter fold down table on the end of the sewing machine.
This is spruce up your Featherweight package that contains a new belt, set of 4 cushions for the bed of your sewing machine, new screws for the cushions and 10 bobbins. A $32.00 value.
This t-shirt is a Gildan quality shirt L size, Ladies style so the sleeves are shorter and the fit for a feminine figure. Show off your love of Singer 221 Featherweights with this cool shirt.
Lavender and light blue colors are available in L and XL.
This t-shirt is a Gildan quality shirt L size, Ladies style so the sleeves are shorter and the fit for a feminine figure. Show off your love of Singer 221 Featherweights with this cool shirt.
Lavender and light blue colors are available in both L and XL
This t-shirt is a Gildan quality shirt XL size, Ladies style so the sleeves are shorter and the fit for a feminine figure. Show off your love of Singer 221 Featherweights with this cool shirt.
Lavender and light blue colors are available in both L and X
This t-shirt is a Gildan quality shirt XL size, Ladies style so the sleeves are shorter and the fit for a feminine figure. Show off your love of Singer 221 Featherweights with this cool shirt.
Lavender and light blue colors are available in both L and X
This is a tube of Singer Lubricant, 1/2 Fluid Oz. that you need to properly maintain your Singer 221 Featherweight Sewing Machine. The motor and the gears use this lubricant rather than the machine oil.
This pin felt goes beneath your spool of thread and protects your machine and allows the thread to move freely. A set of 4 felts in each set. Free shipping!
This spring goes on the spool pin on the Singer 221 Featherweight and helps to keep your thread spool from moving side to side as the thread is pulled off as you sew. Very handy to have!
This is the walking foot to have for your Singer 221 Featherweight sewing machine so that you can sew on thick fabrics or use when quilting so that the top and bottom fabrics feed evenly. Works great!
